Established in 1998, China Dianshen Electric Co., Ltd. is a professional swr meter manufacturer and swr meters design of electric and electronic products. Together with the European 'CE', 'CCC', GS/EMC/LICE/UL/CSA, and 'CB' (IEC) certification that we have received for various series. Currently, our custom swr meter product series are being exported worldwide. Our pursuit of first-rate quality, competitive and cheap swr meters prices and comprehensive after-sales services offers both potential and long-standing clients confidence in our company.

Measures from 0.0001mOhm (0.1milli-Ohm resolution) to 2500.0Ohm
Test current selection of 1mA, 10mA, 100mA, 1A and 10A
RTS temperature probe to check tested sample (optional)
Selectable metal types; Automatic and manual temperature correction
EMF levels measured and eliminated in measurement
Power/SWR Meter and Antenna Matcher Rated 100watts. The RPSWR-3 is a compact 3-function meter designed to indicate the condition of any 52 ohm antenna and antenna coax used for Citizens Band radio operation by testing for the Standing Wave Ratio or relative RF Power. Micro-Ohmmeter Model 6250 (10A, Instantaneous, Continuous, Multiple Test, Manual/Auto Temperature Compensation; includes 10A Kelvin Clips (Hippo) and DataView® Software)

The SWR meter needs to be placed in line between the antenna and the CB. Connect the antenna (normally connected to the back of the CB ) to the connector marked "Antenna" or "Ant" on your SWR Meter. Connect one end of the short jumper coax to the "transmit" or "Xmit" on the SWR meter. Connect the other end of your jumper coax to the CB. Assuming you have a standard SWR meter the switches should read as follows: REF or SWR, FWD, and there should be a slide switch marked "set" or "Adjust". If different consult your meter's owners manual. With the radio on the lowest channel (1 on CB) and the SWR meters switch in the Forward (FWD) position, depress the transmit switch (key up) located on the microphone. While holding the unit in this transmit mode, adjust the meter needle to the set position using the Set or Adjust knob on the meter. As soon as the needle is in alignment with the corresponding mark on the meter face, flip the switch to the Reference (REF) position. The meter is now showing your SWR on channel one. Note the value and quickly release the microphone switch. Record this reading.

Also you can visit China Electrical & Electronics Manufacturer Catalog or China Electrical & Electronics Products Catalog to find more China Products!