Established in 1998, China Dianshen Electric Co., Ltd. is a professional recoil starter manufacturer and recoil starters design of electric and electronic products. Together with the European 'CE', 'CCC', GS/EMC/LICE/UL/CSA, and 'CB' (IEC) certification that we have received for various series. Currently, our custom recoil starter product series are being exported worldwide. Our pursuit of first-rate quality, competitive and cheap recoil starters prices and comprehensive after-sales services offers both potential and long-standing clients confidence in our company.

An electric spark must be provided in a cylinder to ignite the fuel mixture. This is the function of the ignition system. The spark must be of sufficient intensity not only to ignite the fuel mixture, but also to ignite it at the correct time. A good ignition system which functions properly is very important.
In a small gas engine ignition system, the current starts in the primary circuit. The current is devloped through the armature and the magnetic portion of the flywheel. As the flywheel turns, a current is creates as the magnetic part of the flywheel passes under the armature. The current in the primary circuit is essentially a low-voltage circuit. As the breaker points open and close, electric current pulses through the primary coil. This pulsing current causes waves of magnetism to form. Each time the breaker points open, the magnetic field in the primary coil collapses, crossing the many turns of wire in the secondary coil. At this moment, a very rapid high-voltage current is crested in the secondary coil, up to 20,000 volts. This high voltage current jumps across the gap of the spark plug, igniting the charge of fuel in the cylinder during the beginning of the power stroke.

The comfortable 2PEKA transmitter features FM signal clarity, plus End Point Adjustment (EPA), dual rates and more!Comes with two Futaba servos, including an S3302 1/4 scale steering servo with durable metal gears!A built-in fail-safe unit returns the engine to idle if battery power is low, or if another modeler shares your radio frequency!
Also supplied: a 5-cell 1800mAh NiCd receiver battery and wall charger!
Uses regular gasoline and 2-cycle oil!
Starts easily with the included recoil starter!
Much simpler to operate than "glow" engines!
Requires no special equipment such as glow plugs, igniter or starter box!
Features a push-button kill switch for added safety!
Delivers run times of over 1/2 hour on a single tank of gas!

Also you can visit China Electrical & Electronics Manufacturer Catalog or China Electrical & Electronics Products Catalog to find more China Products!