Established in 1998, China Dianshen Electric Co., Ltd. is a professional low voltage transformer manufacturer and low voltage transformers design of electric and electronic products. Together with the European 'CE', 'CCC', GS/EMC/LICE/UL/CSA, and 'CB' (IEC) certification that we have received for various series. Currently, our custom low voltage transformer product series are being exported worldwide. Our pursuit of first-rate quality, competitive and cheap low voltage transformers prices and comprehensive after-sales services offers both potential and long-standing clients confidence in our company.

Can be used to provide power to all 12- volt lights. Available in different sizes and features. Product may differ from photo depending upon vender's shippment. 10 amp 12 or 24 volt power transformer Single phase buck boost transformer design for use to supply 12 or 24 volt secondaries with 120 volt primary. .250 kVA, 60 Hz, 250 watt 10 amp at 24 volt. UL listed and CSA approved for indoor and outdoor use. Knock outs and keyhole mounting holes for easy installation. Weight is 5.7 pounds. Dimensions 8 inches x 3 3/8 inches x 2 3/4 inches. Optimal internal layout to minimize the HV interconnections. Built in reliability - TR sets are designed for 24 X 7 operation in adverse Environmental conditions. Can withstand continuous "Open Circuit" OR "Short Circuit" conditions. High Life Expectancy through Design.

Low voltage transformers for the measurement of AC voltages up to 2kV. Protected construction with unbreakable bushing insulators; suitable for indoor use.Pre-wired 12v, dimmable electrical transformers. Full VDE certification for low voltage and EMC. Fitted with soft start, which prolongs the life of the lamp. Short-circuit and overload protection, the transformer will shut off automatically in the case of short circuit or overload, after removing the cause of the short circuit or overload the transformer will start to supply the load again. In the event of over temperature the transformer will cut the load by means of a thermal fuse.
European manufacture. CE marked, VDE Approved. Input Mains: 220 to 240VAC 50Hz. Loading must be in the range of 75 to 200 Watts (200VA max). Additional notes when installing.

Also you can visit China Electrical & Electronics Manufacturer Catalog or China Electrical & Electronics Products Catalog to find more China Products!